| Quick navigation: | Home | Site Map || References | Biography || Copyright | Other copyright | Contact us | Advert | | |
Re: [ccp4bb] cracking crystal |
||
- Protein crystallographyMain steps:- Protein purification- Crystallisation Special:- Programs for crystallography- X-ray detectors Basic tutorials:- Chemistry- Protein - Peptide - Amino Acids Xtal community:- CCP4BB |
CCP4bb navigationCCP4bb <-- 1999 <-- November 1999 <-- 30 November 1999Subject: Re: cracking crystal From: Artem Evdokimov artem {- at -} XTALS {- dot -} ORG Date: 2009-09-01 You can always give this one a try: http://www.xtals.org/crystal_cryo.pdf Artem "Nothing is built on stone; all is built on sand, but we must build as if the sand were stone" Jorge Luis Borges _____ From: CCP4 bulletin board [mailto:CCP4BB@JISCMAIL.AC.UK] On Behalf Of Fengxia Liu Sent: Tuesday, September 01, 2009 5:25 AM To: CCP4BB@JISCMAIL.AC.UK Subject: [ccp4bb] cracking crystal Dear All, Could you please help me solve this problem? I have a sensitive crystal, the mother liquor is 10% PEG4k+ 100 mM Tris-buffer pH 8.5, crystal is big and good but very sensitive, when i put it in cryoprotectants, cracking happened. First i used artificial mother liquor + 25% v/v glycerol, slowly decrease to + 12.5% v/v glycerol, all crystals cracked after immersed, finally i tried 50% mineral oil + 50% paratone, it still cracked (4- 5 cracks, but not broken) . even this cracked crystal can give me 3.2 angstrom diffraction, so no cracked crystal might give me 2.0+ angstrom diffraction. Now i don't have many crystals to try so many cryoprotectants, so anybody has experience on this? any suggestion would be greatly appreciated. Thank you. Fengxiale CCP4bb navigationCCP4bb <-- 1999 <-- November 1999 <-- 30 November 1999 |
|
| ProteinCrystallography.org: Copyright 2006-2010 by Quid United Ltd |