[ccp4bb] scala : SdB

Protein crystallography Programs for crystallography X-ray detectors
Basic tutorials:
Protein Peptide

CCP4bb navigation

CCP4bb <-- 2008 <-- January 2008 <-- 17 January 2008

Previous message:
Subject: Re: crystallisation robot
From: mjvdwoerd {- at -} NETSCAPE {- dot -} NET mjvdwoerd {- at -} NETSCAPE {- dot -} NET
Date: 2008-01-17

Next message:
Subject: Fwd: crystallisation robot
From: Patrick Shaw Stewart patrick {- at -} DOUGLAS {- dot -} CO {- dot -} UK
Date: 2008-01-18

Subject: scala : SdB
From: "Bryan W {- dot -} Lepore" bryanlepore {- at -} MAIL {- dot -} UTEXAS {- dot -} EDU
Date: 2008-01-17

just want to check my understanding on scala. the manual says :

"SdB may be omitted in the input and its use is not recommended. Default
values are 1.0, 0.0, 0.02"

the example shown is :

sdcorrection full 1.4 0.11 part 1.4 0.05

.. i.e. if SdB were set, it would have been between the 1.4 and 0.11, etc.
running a similar job has SdB set to 0.00 at the start, seeming to confirm
this.

.. so is setting SdB to zero equivalent to "not using SdB"?

-bryan

CCP4bb navigation

CCP4bb <-- 2008 <-- January 2008 <-- 17 January 2008

Previous message:
Subject: Re: crystallisation robot
From: mjvdwoerd {- at -} NETSCAPE {- dot -} NET mjvdwoerd {- at -} NETSCAPE {- dot -} NET
Date: 2008-01-17

Next message:
Subject: Fwd: crystallisation robot
From: Patrick Shaw Stewart patrick {- at -} DOUGLAS {- dot -} CO {- dot -} UK
Date: 2008-01-18