Quick navigation:        Home   |    Site Map   ||    References   |    Biography   ||    Copyright   |    Other copyright   |    Contact us   |   
Protein structure
 

[ccp4bb] crystallisation
 

Basic tutorials: 		 
 

CCP4bb navigation

CCP4bb <-- 2008 <-- June 2008 <-- 02 June 2008
Previous message:
Subject: Re: 3D model building without CRT monitor
From: Jim Fairman fairman {- dot -} jim {- at -} GMAIL {- dot -} COM
Date: 2008-06-02 		Next message:
Subject: Re: 3D model building without CRT monitor
From: Mike Latchem mike {- dot -} latchem {- at -} DIAMOND {- dot -} AC {- dot -} UK
Date: 2008-06-02


Subject: crystallisation
From: sajid akthar b_sajid_ali {- at -} YAHOO {- dot -} CO {- dot -} IN
Date: 2008-06-02

Dear All

My protein size is ~30kD and crystallizes with
19%Peg3350, 0.2M Nacl, and 0.1M Na Cacodylate buffer.

Please refer the attached crystal image with this. The
crystal looks like good enough for home source. These
crystals appears in 4-5 days at room temp.

Sometimes I'm getting crystals like this, but very few
in 24 well tray. Most of the time, I found the drop
contains needles. If I reduce the precipitant little
bit, I wont find any change in the drop even after
long time. Changing pH (or temp)of the buffer does not
help me any better. The crystal appears only around
5.5pH.

The problem is mosaicity. This crystal diffracted in
home source upto 3.2A and the mosaicity is 2.5degree.
Almost all the good crystal like this having same
mosaicity.

Good cryo condition so far that I found was
10%Glycerol with mother liquor. Other conditions
weekens the diffraction quality or increase mosaicity.

In many crystal I could see some crack in the middle
of the crystal, it looks like twin crystal. Or the
crystal appears with some sattelite crystals.

Can anyone suggest me some good way to overcome these
problems.

Thankz

Sajid



From Chandigarh to Chennai - find friends all over India. Go to http://in.promos.yahoo.com/groups/citygroups/

CCP4bb navigation

CCP4bb <-- 2008 <-- June 2008 <-- 02 June 2008
Previous message:
Subject: Re: 3D model building without CRT monitor
From: Jim Fairman fairman {- dot -} jim {- at -} GMAIL {- dot -} COM
Date: 2008-06-02 		Next message:
Subject: Re: 3D model building without CRT monitor
From: Mike Latchem mike {- dot -} latchem {- at -} DIAMOND {- dot -} AC {- dot -} UK
Date: 2008-06-02


ProteinCrystallography.org: Copyright 2006-2008 by Quid United Ltd